TCB
TCB Series Ceramic Slurry Pump
Ceramic-lined slurry pump for duties where metal wear parts fail too quickly.
- Flow range
- 10 – 16,800 m³/h
- Head range
- 5 – 80 m
- Bore
- 25 – 1,000 mm
- Wetted partsWear-resistant ceramic lining
- Family Slurry Pumps
Series overview
TCB replaces the alloy wet end with a wear-resistant ceramic lining. It is specified where the solids are fine but extremely abrasive — quartz sand being the classic case — and where alloy liners are being replaced too frequently.
The series spans 10 to 16,800 m³/h and 5 to 80 m of head in bores from 25 to 1,000 mm.
Design features
- Ceramic lining for extremely abrasive, fine solids
- Extends wear life where alloy liners are consumed too quickly
- Available across the large slurry bore range
Specifications
| Flow range | 10 – 16,800 m³/h |
|---|---|
| Head range | 5 – 80 m |
| Nominal bore | 25 – 1,000 mm |
| Configuration | Horizontal centrifugal slurry pump |
| Wet-end material | Wear-resistant ceramic lining |
Ranges are taken from the printed catalogue. Final selection depends on the duty point, slurry density and site conditions — share your data and we will confirm the model.
Typical duties
- Quartz sand
- Fine abrasive minerals
- Chemical slurries
- Duties with very high wear rates
