L
L Series Light-Duty Alloy Slurry Pump
Light-duty alloy-lined slurry pump for fine-particle duties up to 15,000 m³/h.
- Flow range
- 25 – 15,000 m³/h
- Head range
- 4 – 68 m
- Bore
- 20 – 750 mm
- Wetted partsAlloy impeller and liner
- Family Slurry Pumps
Series overview
The L series pairs a light-duty casing with alloy wear parts. It is selected when the slurry attacks rubber chemically, or when the head requirement is higher than the rubber-lined LR can deliver.
Coverage runs to 15,000 m³/h and 68 m of head across bore sizes from 20 to 750 mm.
Design features
- Alloy wear parts for slurries that attack rubber
- Light casing for large flow in a compact frame
- High-head capability compared with the rubber-lined LR
Specifications
| Flow range | 25 – 15,000 m³/h |
|---|---|
| Head range | 4 – 68 m |
| Nominal bore | 20 – 750 mm |
| Configuration | Horizontal centrifugal slurry pump, light-duty casing |
| Wet-end materials | Alloy impeller and liner |
Ranges are taken from the printed catalogue. Final selection depends on the duty point, slurry density and site conditions — share your data and we will confirm the model.
Typical duties
- Fine abrasive tailings
- Sand and gravel washing
- Coal preparation
- Chemical slurries
