AH / HH
AH / HH Series Slurry Pump
Cantilever horizontal slurry pump with an alloy impeller and liner, for abrasive and corrosive duties from 2 to 2,772 m³/h.
- Flow range
- 2 – 2,772 m³/h
- Head range
- 4 – 97 m
- Motor power
- 15 – 1,200 kW
- Bore
- 25 – 500 mm
- Model designations3/2C-AH, 4/3C-AH, 6/4D-AH, 8/6E-AH, 8/6E-G, 10/8F-G, 10/8S-GH, 12/10G-G
- Design standardJB/T8096-1998
- Wetted partsAlloy impeller and liner (HH high-head variant also available)
- Family Slurry Pumps
Series overview
The AH series is the alloy-lined member of the cantilever slurry family: a horizontal centrifugal pump for abrasive and corrosive slurries, used in metallurgy, mining, petroleum, chemicals, coal, power, dredging, building materials and municipal engineering.
It shares its hydraulic envelope with the AHR rubber-lined version, so the same duty point can be met with either an alloy or a rubber wet end depending on the particle shape and the chemical environment.
Design features
- Alloy impeller and liner for abrasive and mildly corrosive slurries
- Cantilever bearing arrangement keeps the drive clear of the slurry
- Interchangeable with the AHR rubber-lined version for the same hydraulic duty
- Used across metallurgy, mining, coal, power, dredging and municipal works
Specifications
| Flow range | 2 – 2,772 m³/h |
|---|---|
| Head range | 4 – 97 m |
| Motor power | 15 – 1,200 kW |
| Nominal bore | 25 – 500 mm |
| Design standard | JB/T8096-1998 |
| Configuration | Horizontal cantilever centrifugal slurry pump |
| Wet-end materials | Alloy impeller and liner; rubber-lined AHR variant available |
Ranges are taken from the printed catalogue. Final selection depends on the duty point, slurry density and site conditions — share your data and we will confirm the model.
Typical duties
- Metallurgical slurries
- Mining and ore dressing
- Coal washing
- Power plant ash
- River dredging
- Municipal works
