AFB
AFB Series Stainless Steel Corrosion-Resistant Pump
Stainless steel chemical pump with 1Cr18Ni9Ti wetted parts for corrosive liquids from -20 °C to 130 °C.
- Flow range
- 3.6 – 200 m³/h
- Head range
- 15 – 65 m
- Motor power
- 1.5 – 37 kW
- Medium temperature
- -20 °C to +130 °C
- Design standardGB/T5656-94
- Wetted parts1Cr18Ni9Ti stainless steel wetted parts
- Family Chemical & Process Pumps
Series overview
AFB is a single-stage, single-suction cantilever corrosion-resistant pump with all wetted parts in 1Cr18Ni9Ti. It is intended for corrosive liquids that do not contain solid particles, from -20 °C to +130 °C, with inlet pressure normally up to 0.2 MPa and up to 0.35–0.4 MPa with a special design.
The series is widely used in chemical, petroleum, metallurgical, light industry, synthetic fibre, pharmaceutical and food processing plants, where its sealing and compact construction reduce leakage and product loss.
Design features
- All wetted parts in 1Cr18Ni9Ti stainless steel
- Handles corrosive liquids without suspended solids
- Stable performance, reliable operation and good sealing
- Light, compact construction that is easy to service
- Reduces leakage, product loss and environmental load on aggressive service
Specifications
| Flow range | 3.6 – 200 m³/h |
|---|---|
| Head range | 15 – 65 m |
| Motor power | 1.5 – 37 kW |
| Medium temperature | -20 °C to +130 °C |
| Inlet pressure | normally up to 0.2 MPa; 0.35–0.4 MPa with special design |
| Design standard | GB/T5656-94 |
| Wetted material | 1Cr18Ni9Ti |
Ranges are taken from the printed catalogue. Final selection depends on the duty point, slurry density and site conditions — share your data and we will confirm the model.
Typical duties
- Chemical plants
- Petroleum
- Metallurgy
- Light industry
- Synthetic fibre
- Pharmaceutical and food processing
