LP
LP Series Vertical Drainage Pump
Vertical drainage pump with a submerged impeller and no priming requirement.
- Flow range
- 3 – 750 m³/h
- Head range
- 7.8 – 57 m
- Motor power
- 1.1 – 160 kW
- Medium temperature
- up to 50 °C
- Family Water & Wastewater Pumps
Series overview
The LP is a vertical drainage pump designed for a small footprint and low installation cost. The impeller sits submerged in the sump, so there is no priming step at start-up and no long suction pipe.
It is intended for non-corrosive wastewater below 50 °C, with suspended solids below 150 mg/L and particles no larger than 6 mm, and is used across municipal, metallurgical, mining, waterworks, power and petrochemical sites.
Design features
- Small footprint and low civil works cost
- Impeller is submerged, so the pump starts without priming
- Intended for non-corrosive wastewater below 50 °C
- Handles suspended solids up to 150 mg/L and particles below 6 mm
Specifications
| Flow range | 3 – 750 m³/h |
|---|---|
| Head range | 7.8 – 57 m |
| Motor power | 1.1 – 160 kW |
| Medium temperature | up to 50 °C |
| Suspended solids | below 150 mg/L, particle size below 6 mm |
| Configuration | Vertical drainage pump, impeller submerged |
Ranges are taken from the printed catalogue. Final selection depends on the duty point, slurry density and site conditions — share your data and we will confirm the model.
Typical duties
- Municipal works
- Metallurgy
- Mining drainage
- Waterworks
- Power stations
- Petrochemical sites
