DT / DTL
DT / DTL Series FGD Slurry Pump
Flue-gas desulfurisation pump for limestone slurry circulation, gypsum removal and sump duty.
- Flow range
- 4.3 – 9,700 m³/h
- Head range
- 1.4 – 88.6 m
- Motor power
- 4 – 900 kW
- Bore
- 25 – 1,000 mm
- Family FGD & Desulfurization Pumps
Series overview
DT and DTL were developed against the specific duty profile of flue-gas desulfurisation: large flows, moderate heads, and a slurry that is both abrasive (limestone) and scaling (gypsum). The maximum quoted flow reaches 12,000 m³/h with heads generally below 100 m, which covers the whole range of FGD system duties.
Within a single FGD island the series covers absorber-tower slurry circulation, limestone slurry transfer, gypsum slurry discharge, reclaim and pit duty — so a plant can standardise on one wear-part family.
Design features
- Developed specifically for the duty profile of flue-gas desulfurisation systems
- Covers absorber-tower slurry circulation, limestone slurry transfer, gypsum slurry discharge and sump duty
- Quoted flow range reaches 12,000 m³/h, covering the full envelope of FGD system duties
- Heavy-section wear parts for continuous limestone and gypsum service
Specifications
| Flow range | 4.3 – 9,700 m³/h |
|---|---|
| Head range | 1.4 – 88.6 m |
| Motor power | 4 – 900 kW |
| Nominal bore | 25 – 1,000 mm |
| Maximum quoted flow | up to 12,000 m³/h |
| Typical application head | below 100 m |
| Configuration | Horizontal centrifugal FGD slurry pump |
Ranges are taken from the printed catalogue. Final selection depends on the duty point, slurry density and site conditions — share your data and we will confirm the model.
Typical duties
- Absorber tower slurry circulation
- Limestone slurry transfer
- Gypsum slurry discharge
- Reclaim pumps
- Pit and sump pumps
